The Jersey Beanie

Its been a pretty mild winter here in New Jersey, but that hasn’t stopped the winter hat addiction I seem to have. I love hats. This is one of my favorites so far. Its a super squishy, really soft & warm hat that is quick and easy to make. It works up ridiculously fast. I made 3 different hats in one day!!! I crochet slowly too! If you’re ready for the pattern, keep on reading!! You can download an AD FREE pdf from my shop or from ravelry for $1.00.

The Jersey Beanie

By At WIPS End Crochet – A Work In Progress

February 3, 2017

The Jersey hat is a two color fully ribbed beanie that looks great and is soft & warm. This hat works up quickly, uses 3 colors in total, less than 1/2 skein of each! It’s perfect if you have partial skeins laying around. It is also worked from the top down.

Supplies:

  • Hobby Lobby I love this yarn in 3 colors or any other worsted(4) Weight Yarn- 1 ball of each color
  • J/6.0mm Crochet Hook
  • K/6.5mm Crochet Hook
  • Pompom Maker
  • Scissors
  • Tapestry Needle

Crochet Terms used are US/American

  • Ch– Chain
  • M/R – Magic Ring/Magic Circle
  • SlSt– Slip Stitch
  • dc – Double Crochet
  • Fpdc– Front Post Double Crochet
  • sc–Single Crochet
  • SSC – Split Single Crochet
  • F/O – Finish Off
  • C1 – Color #1
  • C2–Color #2
  • C3 – Color #3
GAUGE: Gauge is important to attain proper size.This swatch is completed by using the following pattern:row 1 dc, row 2Fpdc, row 3bpdc repeat row 2 & 3. When measuring for gauge height, turn your swatch over. You will be able to better distinguish rows. * See gauge photos on last page

Gauge is, using 6.5 mm hook and I love this yarn (4) is:
2 inches = 6sts& 4 rows

Pattern Notes:

*The Split Single Crochet (also called the wainscoat stitch or the center single crochet)is performed by inserting your hook in the “V” of the stitch from the previous round/row. Y/O pull up a loop, Y/O pull through both loops. It is essentially a “SC” but it is not done in the traditional loops of the stitch. –see figure 1

Ch1, Ch2do NOT count as stitches

In this pattern, I join to the 2nd fpdc in the round. This moves the CH2 to the inside of the hat. It also creates a seamless beanie, while not “messing” with the final dimensions. Each fpdc is started around the 1st fpdc from previous round (see figure 2)

Pattern photos are at the bottom of this post

 

Adult: (Fits head circumference 19.5 – 22 inches & has a length of 8 inches)

Round 1: With 6.5/K hook, 11 DC in M/R (Ch 2 DOES NOT COUNT AS DC). Join with slst to 2nd dc. Ch 2.

Round 2: 2 fpdc around each stitch (22). Join, ch 2

Round 3: fpdc around 1st st from previous row, 2 fpdc around next. Continue around. (33) Join, ch 2

Round 4: fpdc around 1st 2 sts from previous row, 2 fpdc around next. Continue around (44) join, ch 2

Round 5: fpdc around 1st  3 sts from previous row, 2 fpdc around next. Continue around (55) Join, ch 2

Round 6 – 11 1 fpdc in 1st st from previous row and around (55) Join, ch 2

Join C2.

Round 12 – 17: 1 fpdc in 1st st from previous row and around (55) Join, ch 1

Join C3.

Round 18: sc in each stitch around (55). Join in 1st sc. Ch 1

Switch to (J)6.0mm hook

Round 19: ssc in each stitch around (55). Join in 1st ssc. Ch 1

***Instructions for SSC are located near the top of the page.

Round 20: ssc in each stitch around (55). Join in 1st ssc. F/O

Weave in ends.

Make pompom using pompom maker or your preferred method of making them. Attach to top of hat.

 

I hope you have enjoyed this pattern! I told you it was quick and easy!

 

***** Please do not distribute pattern without permission.*****

If you sell your finished item, I would appreciate a link back (from your online shop) to my website located: http://atwipsend.com

 

**If you have any questions about this pattern, please feel free to contact me through my Facebook page found here:

https://www.facebook.com/atWIPSend/

 

Pattern Photos are Below

 

Figure 1 –Split Single Crochet AKAWainscoatStitch AKA Crochet Knit Stitch Figure 2 –The inside of the hat showing the CH2 of each row. Showing hook Placement for join.
 
Place your hook into the 2ndDC of each round for a seamless join. Gauge swatch – front side – 6 stitches = 2 inches Gauge Swatch – BACK side – 4 rows = 2 inches

 

Coffee Cup Pin Cushion – Free Pattern

I first created this back in April 2016. At first I was charging for this pattern. After some time, I have decided to add this, and ALL of my patterns to my blog for free. (Thankfully there aren’t too many of them). I do offer an AD FREE pattern for $1. You can find my ad free pdf files in my pattern shop. 🙂 to download this pattern, you can find it on Ravelry or in my shop.

Below you will find the FREE coffee cup pin cushion pattern.

 

 

Coffee Cup Pin Cushion

By At WIPS End Crochet – A Work in Progress

Created April 2016

 

Materials List:

  • 3 colors COTTON yarn (MC, C2, C3)
  • 3.5 mm crochet hook
  • Tapestry needle
  • Scissors
  • Small safety eyes

Terminology Used:

  • CH- Chain
  • SlSt – Slip Stitch
  • Rnd – Round
  • SC – Single Crochet
  • HDC – Half Double Crochet
  • TR – Triple Crochet
  • FLO – Front Loop Only
  • BLO – Back Loop Only
  • Rpt – Repeat
  • f/o – finish off
  • MR – Magic Ring
  • Sc2tog – Single Crochet 2 together

Pattern Notes:

  • Pattern is worked in Single Crochet in the round. All rounds are JOINED unless otherwise mentioned.
  • Ch stitches DO NOT count in stitch count.

**DISCLAIMER**

By working this pattern, you are agreeing to NOT distribute this pattern without permission of the designer (At WIPS End Crochet). You MAY sell the finished product, but would appreciate a link back to my website: http://www.atwipsend.com/ If you have any questions or problems, please feel free to message me on my facebook page: http://www.facebook.com/atWIPSend 

 

 

Cup:

MC, 10 SC in MR, join to 1st st, pull right closed.

Rnd 1: Ch 1. 2 sc in same as join. 2 sc in each st around. Join. (20)

Rnd 2: Ch 1, SC in same as join, 2 sc in next *1 sc in next, 2 sc in next* rpt x5  Join.(30)

Rnd 3: ch 1, BLO, sc in same as join & around. Join (30)

Rnd 4: ch 1, SC2TOG (join & next st), SC in next 13, SC2TOG, SC next 13. Join (28)

Rnd 5: ch 1 FLO, skip join, 2 sc in next, 1 sc next 3. x7 join. (35)

Rnd 6: ch 1, 2 sc in same as join, *1 sc next 4 sts. 2 sc in next, 1 sc next 4 sts* x 5. join (42)

Rnd 7: ch 1, sc in same as join and next 4 sts, 2sc in next. *sc next 5, 2 sc in next* x5. Join (49)

Rnd 8 – 12: ch 1, sc in same and around. Join (49)

Rnd 13 & 14: ch 1 hdc around, Join (49)

Rnd 15: ch 1, sc around. Join. f/o (49)

 

 

Handle:

With MC, ch 15. SC in 2nd ch from hook (using back ridge). SC in next 13 sts. 4 SC in last ch. **DO NOT carry your yarn through the back stitches** 12 SC along bottom of original chain, 3SC in last st. Join. Slst around. f/o

*you should have a tail at both ends*

 

 

Saucer:

With MC, 10 HDC in MR. Pull tight, before joining, pull tail between the first and last stitches.

Rnd 1: Ch 1. 2 hdc in same as join and around (20)

Rnd 2: ch 1.  hdc in same as join, 2 hdc in next *hdc in next, 2 hdc in next* rpt around (30)

Rnd 3: ch 1. 2hdc in same as join, hdc in next two. *2hdc in next, hdc next 2* rpt around (40)

Rnd 4: ch 1. hdc in same as join and next 2 sts. 2hdc in next. *hdc next 3 sts, 2 hdc in next* rpt around (50)

Rnd 5: ch 1. 2hdc in same as join. Hdc in next 4. *2hdc in next, hdc in next 4* rpt around. (60)

Rnd 6. Slst around. f/o weave in tail, leaving the tail through the center as that is used to sew saucer to cup.

 

Top: (This will be worked in a continuous spiral)

Using C2, 7 SC in MR. Pull tight, but DO NOT JOIN

Rnd 1: 2 sc in each st around (14)

Rnd 2: sc in next, 2 sc in next, rpt around (21)

Rnd 3: 2 sc in next, sc in next 2, rpt around (28)

Rnd 4: 2 sc in next, sc in next 3, rpt around (35)

Rnd 5: 2 sc in next, sc in next 4, rpt around (42)

Rnd 6: 2 sc in next, sc in next 5, rpt around (49)

Rnd 7 – 9: 1 sc in each st around (49) f/o leave long tail for sewing

**NOTE: you may omit one or 2 rounds depending on how well the top fits to the cup. Before stuffing, it should fit snuggly inside the last round of the cup**

 

Heart:

C3, In MR, ch 3, 3 TR, 3 dc, ch 2, 3 dc, 3 TR, ch 2, slst in ring. Pull tight, f/o, Leave tail for sewing.

 

Assembly:

  • Handle: sew top of handle to 1st round of hdc. Weave in end. Shape the bottom part of the handle to how you would like it then sew in place. *the best place for the handle is covering the “join”. Weave in end.
  • Saucer:  Sew bottom of cup to middle of the saucer with string left from the saucer. Come up inside the cup, behind the ridge from the “BLO” round. Continue around. f/o and weave in end.
  • Face (Optional): add small mm safety eyes, and create a smile with black crochet thread.
  • Heart: Sew your heart to the coffee top in a position you would like. I chose to sew mine off center.
  • Stuffing/finishing: Partially stuff coffee cup with poly-fil or filling of your choice. Fit your Top Piece to the cup and whip stitch the coffee to the inside loop of the cup. Leave approximately 2-3 inches undone to finish firmly stuffing your cup. When stuffed completely, whip stitch the opening closed.

Coffee Cup Pin Cushion

I hope you have enjoyed this pattern! I had a blast making it!!

 

Sleepy Owl Graph

Its a sleepy day here at At WIPS End. We’re in the middle of a Nor’ Easter, which is making me want to just cuddle up and go to sleep!! This cute little sleepy owl is 50 x 60 stitches and can be done using any type of yarn. It depends on how big you want the afghan to be. This graph was designed to be completed in either C2C (Corner to Corner) or Bobble Stitch. Personally, I think this one would be amazing done in bobble stitch. If anyone completes this one using that stitch, please post a photo of it on my facebook page. I would love to see any versions completed. I love to see others visions. Please share with me!

To download this pattern, please visit my pattern shop or Click here

 

AWE Sleepy Owl – C2C

By At WIPS End – a Work In Progress..

Pattern requires:

Several colors worsted weight yarn (Red Heart or similar)

Recommended 5.0 or 5.5mm hook size or Similar Afghan Hook

Finished Size (In stitches):

50w X 60h – Finished size in inches depends on your yarn, hook, and your gauge.

Pattern Notes:

On the graph pattern, you will notice that it “DMC” followed by numbers. These colors are used as a guideline for choosing the colors you wish you use. DMC is a type of embroidery floss used in cross stitch as well as many other projects. By looking up the floss number, you have a good idea of what color YARN to choose in your project, of course, these are just guidelines & you may choose whatever colors you would like. 🙂

By downloading this pattern, I am assuming you have basic knowledge of creating graphgans. If not, please feel free to visit my facebook page (linked below) if you have questions or run into problems.

This graph is designed to be worked using either the Corner to Corner technique or using a bobble stitch. If you are unsure how to work these stitches, YouTube has some wonderful tutorials.

To find out when new patterns are released, please like my facebook page

http://www.facebook.com/atWIPSend  

Snowy Hearts Messy Bun Free Pattern

topphotoThe “Messy Bun” hat craze is well underway. Some may worry that these hats just won’t be that warm with a hole in the top. Let me put those fears aside by giving you a messy bun hat that is sure to keep you warm by using soft, extra warm, bulky weight yarn.You can make this pattern in either the Messy Bun look or complete the hat for a warm, cozy, & stylish beanie. Keep in mind, this messy bun pattern is FREE only on my blog. To download a PDF copy, of the pattern for $1.00, (AD FREE!!!) please visit my pattern shop. The link is above titled “shop” (at the very top of the page) or “Pattern Shop” in the links above.

Please, enjoy this copy of the Snowy Hearts Messy Bun or Beanie.

 

For this pattern, you will need the following supplies:

Supplies:
  • Loops & Threads Charisma in 2 colors or any other bulky (5) weight yarn – 1 ball of each color
  • J/6.0 mm crochet hook
  • K/6.5 mm crochet hook
  • Button (optional)
  • Scissors
  • Tapestry Needle
Crochet Terms used are in US/American
  • Ch – Chain
  • SlS
  • t – Slip Stitch
  • BLO- Back loop only
  • Hdc – half double crochet
  • Dc – Double Crochet
  • V-Clus – V-Stitch Cluster**
  • F/O – Finish Off
  • Sk – Skip
  • y/o – Yarn Over
  • Hdc2tog – Half Double Crochet 2 stitches together
  • C1 – Color #1
  • C2 – Color #2
  • Slst2tog – Slip Stitch 2 together
  • Slst3tog – Slip Stitch 3 together
GAUGE:

Gauge is important to attain proper size. Gauge swatch was completed using Loops & Threads Charisma and a J/6.0 mm hook.

Gauge is: 2inches = 6 hdc & 4 rows

*The V-Stitch Cluster is performed by y/o, insert hook into stitch, pull up a loop. y/o pull through 2 loops (2 loops on hook), y/o insert hook into SAME stitch, pull up a loop (4 loops on hook), y/o, pull through 2 loops, y/o pull through 3 remaining loops on hook. Repeat 1 more time to complete cluster. -see figure 1

**Mock Cluster *at beginning of each cluster round* Ch 3, DC into same sp as chain, y/o, insert hook into stitch, pull up a loop. y/o pull through 2 loops (2 loops on hook), y/o insert hook into SAME stitch, pull up a loop (4 loops on hook), y/o, pull through 2 loops, y/o pull through 3 remaining loops on hook.

***Carry your yarn up through rows

Ch 2, Ch 3 do NOT count as stitches

Pattern photos are on last page

Messy Bun:

Brim:

Row 1: With J Hook & C1, ch 8. Turn & slst across (7). Ch1, Turn. Be careful to always turn work in same direction.

Row 2: BLO for the remainder of the brim. SlSt (BLO) 7, ch 1, turn.

Row 3: Repeat row 2 until brim reaches 18.5 inches.

Join 2 ends together by slst in BLO of both edges.

For the remainder of hat, we will be working in the round. (Follow Messy Bun portion until row 9, finish up below pattern)

HAT/MESSY BUN: Switch to K/6.5 mm hook

Rnd 1: Ch 2, HDC in each “bump” *figure 2 of hat brim around, creating 44 stitches. Join to top of ch 2. (44)

*** please note, pattern can be adjusted to meet your needs/size by adding or subtracting stitches in multiples of 4. This will adjust the amount of stitches you will have for the rest of the pattern. For each addition of 4 stitches, you will add 1 V-Clus to your total.

Rnd 2: Switch to C2, **Mock Cluster, skip next 2 sts. *V-Clus in next st, sk next 2* repeat from * to *. Join to top of Ch 3 at beginning. (1 Mock Cluster, 14 V-Clus)

Rnd 3: slst to center of first cluster. Change to C1. Mock Cluster, V-Clus in the center of each V-Clus from the previous round. Join to top of Ch3. (1 Mock Cluster, 14 V-Clus)

Rnd 4: slst to center of first cluster. Change to C2. Mock Cluster, V-Clus in center of each V-Clus from previous round. Join to top of Ch 3. (1 Mock Cluster, 14 V-Clus)

Rnd 5: sl st to center of first cluster. Change to C1. Create Mock Cluster. V-Clus in center of each V-Clus from previous round. Joing to top of Ch 3. (1 Mock Cluster, 14 V-Clus)

Rnd 6: switch to C2. Ch 2. HDC in same as join and each st around. Join to top of ch 2. (30)

Rnd 7: Ch 2. HDC between 1st & 2nd HDC in round. Repeat around. Join to top of ch 2. (30)

Rnd 8: Ch 2, HDC in next. Hdc2tog. *hdc in next, hdc2tog*. Repeat from * to * around. Join to top of ch 2. (20)

Rnd 9: Ch 2. Hdc2tog around. (10) F/O, weave in ends.

*** Continue below for optional brim finish.****

Basic Beanie:

Complete brim & rounds 1-9 for Messy Bun Hat. DO NOT F/O after completing round 9.

Rnd 10: ch2, hdc2tog around. Join to top of ch2. (5)

F/O leaving tail. Using yarn needle, sew small hole together at top with yarn. Weave in ends.

**You can either leave hat slightly pointed, which will round out when fitted to head or you can add a pompom or tassel to finish off beanie.

Optional Brim flap & With Button.

Using J/6.0 mm hook, attach C1 to seam of brim using a slst. Slst across seam (7). Ch 1, turn.

SlSt in BLO across. (7). Ch 1, Turn.

Repeat last row until flap is 10 inches long.

Slst2tog, slst (BLO) in next 3, slst2tog. Ch 1, turn

Slst2tog, slst, slst2tog. Ch1, turn

Slst3tog.

F/O weave in tail.

Using same color, cut off small piece of C1 to sew/slst flap in the middle to keep it from sliding. Sew flap end to brim. Attach button(s) to flap.

I hope you have enjoyed this pattern.

***** Please do not distribute pattern without permission.*****

If you sell your finished item, I would appreciate a link back (from your online shop) to my website located: http://atwipsend.com/shop

**If you have any questions about this pattern, please feel free to contact me through my Facebook page found here: https://www.facebook.com/atWIPSend/

Pattern Photos are Below

vclus bump finished
Figure 1 – V-Cluster stitch, completed Figure 2 – Bump where each HDC around gets put into. Finished Product/Beanie with optional brim

 

Its almost ready!!

 

So exciting!! My brand new FREE #crochetpattern is out with testers!! This pattern was written 2 ways with an optional addition to the brim of the hat. It is either a regular beanie or it’s one of the ever popular #messybun hats!! This pattern uses bulky (5) weight yarn, so it’s snuggly and warm! Be on the lookout for the #pattern

Favorite Five!!

fab51617

Everybody loves a freebie right?? I’ve been scouring the web to find some good crochet projects. Every week, I’d like to give you my Favorite Five. I will find you five FABULOUS FREE crochet projects each week and post them here for you to enjoy!! This is the first week I am doing this, So bear with me as I get this right. I now present you with my Favorite Five Friday Freebies!!

Show these designers some love!! They have done a great job on these patterns & best of all, they are offering them for free. They are absolutely beautiful!!

 

 

 

Friday January 6, 2017 Favorite Freebies:

  1. Henry’s Baby Blanket from Little Monkey’s Crochet – This adorable baby blanket is perfect for Boys and Girls alike!!
  2. Charlotte’s Dream Blanket from Look What I Made – What can I say about this beautiful blanket?? Its gorgeous & best of all, its free!!!
  3. Sun Valley Hat from Lion Brand Yarns – Check out this awesome basket weave bonnet type hat. I adore this design!!
  4. Go With the Flow Super Scarf from My Hobby is Crochet – one of the prettiest super scarves I have found. I cant wait to get this scarf on my hook!!
  5. Amazing Grace Blissful Slouchy from Beatrice Ryan Designs – Great design and looks like its nice & warm!! Give this hat a try 🙂

Check back here every friday for more fabulous finds!!

 

Feeling the Love

loveblogI’ve been feeling the Love lately!!! And I absolutely adore it. I have been trying to get some things out & get things up and transition ALL of my patterns up on my blog, but that hasn’t happened just yet. I promise it will though. The last few days have been pretty rough for me. I’ve been sick & trying to finish up orders. I needed a break and figured it was the perfect time to get a graph out. I now present to you, inspired by the LOVE statue from the City of Brotherly Love, My Love Afghan. As promised in my previous post, this graph is 100% hand drawn. You can download this pattern from my Ravelry Shop for $1!! Click HERE to grab the pattern from my pattern shop. Information about the pattern is as follows:

Pattern requires:
Several Colors worsted weight yarn (Red Heart or similar)**
Recommended 5.0 or 5.5mm hook size (Your size hook & gauge will determine the final size of the afghan)

Finished Size (In stitches or blocks):
50w X 60h

Pattern Notes:

This graph is designed to be worked using either the Corner to Corner technique or using a bobble stitch. If you are unsure how to work these stitches, YouTube has some wonderful tutorials.

By downloading this pattern, I am assuming you have basic knowledge of creating graphgans. If not, please feel free to visit my facebook page (linked below) if you have questions or run into problems.

I hope you enjoy this pattern

To find out when new patterns are released, please like my facebook page:
http://www.facebook.com/atWIPSend

New Years Resolution

hny

 

I cant believe 2016 is coming to an end already! Its been a great year & unfortunately, I have not offered many patterns at all this year.  As a New Years Resolution, All of my graph patterns will be HAND Drawn. I will not be using any type of clip art or web images to clean up and graph to offer to you. I have tons of already premade images just waiting to be graphed for your use.

I will still take some requests, but they may take longer as I will be re-drawing them. I prefer to have my own work, rather than someone elses.

As another resolution, I am going to get these ideas out of my head and onto “paper”. I have several non-graph patterns in the works and I cannot wait to show them to you!!!

Now we say goodbye to 2016 & Hello to 2017!!!

Lined Minion Inspired Bag

minionbag1

Free Pattern alert!!

Who doesn’t love these adorable yellow guys who love bananas and fart noises?? I know my little one just adores them. I came up with this wonderful little pattern. I DID find that the handles may be off center and uneven when working in the round with HDC. There are some video’s on YouTube that may help you out. Please view either THIS video or THIS video to help you out.

You can download this pattern in my SHOP or on Ravelry for $1.

This pattern calls for 5 colors of yarn, using less than 1/2 – 3/4 skein of yarn of each color. The finished size of this bag is approximately 9 inches high (before handles) x 10 inches wide. The pattern is worked in the round, except for the eyelid portion of the pattern.
It includes instruction for lining the finished bag using fabric & #10 crochet thread.

 

Without further ado, Here is the written pattern:

Minion Inspired Bag

By At WIPS End Crochet – A Work in Progress

Originally Published:  July 2015

 

Supplies:
  • 5 colors of worsted weight (4) yarn, 1 skein each. I used Red Heart.
  • I/5.5mm crochet hook
  • Tapestry Needle
  • Scissors
  • If lining bag, you will also need a piece of fabric large enough to fill the inside of the bag from about the top of the black line down. You will also need yellow #10 crochet thread and Blue/Black #10 crochet thread (embroidery floss will work as well)

 

Crochet Terms used are US/American

  • Rnd – Round
  • Ch – Chain
  • BLO – Back Loop Only
  • SC – Single Crochet
  • HDC – Half Double Crochet
  • DC – Double Crochet
  • F/O – finish off
  • sts – stitches
  • chsp – chain space
  • sp – space
  • slst – slip stitch
For the bag (worked in rounds):

With blue, ch 31

Rnd 1: hdc in 2nd ch from hook. Hdc to end (30 sts). 3 hdc in same sp. Hdc in opposite side of row to next to last st. 4 hdc in last st. join with slst. (64 sts) (DO NOT TURN)

Rnd 2: ch 1, hdc in same st as slst. Hdc in next 28 sts (29), 2hdc in next st, hdc in next, 2hdc in next st. hdc in next 29 sts, 2hdc in next, hdc in next, 2 hdc in next Join (68 sts)

Rnd 3: this round is worked BLO Ch 1. sc same st. sc in next 29 sts (30), 2 sc in next, sc in next, sc in next, 2 sc in next. Sc in next 30 sts. 2sc in next, sc in next, 1 sc in next, 2sc in next.  Join with slst. (72 sts)

Rnd 4 – 9: ch 2. Dc in same st & around. Join with slst. (72 sts)

Rnd 10: Switch to yellow. Ch 1. Hdc around, join with slst (72 sts)

Rnd 11-18. Ch 1, hdc around, join. (72 sts)

Rnd 19: switch to black, Ch 1, hdc around. Join with slst (72 sts)

Rnd 20: ch 1, hdc around, join with slst (72 sts)

Rnd 21-23: switch back to yellow. Ch 1. Hdc in same as join and all the way around. Join w/ slst (72 sts)

Rnd 24: ch 1, sc in same as join. Sc around. Join (72 sts)

Rnd 25: (Handles) Ch 1. Sc in same and next 9 sts. Ch 12. Skip 11 sts, sc in next. Sc in next 23, ch 12, skip 11 sts, sc in next, sc in next 15. Join (74 sts… 52sc, 22 ch)

Rnd 26: ch 1, sc in same and next 5, hdc in next 4 sts, 15 dc in chsp. Hdc in next 4, sc in next 16, hdc in next 4, 15 dc in chsp, hdc in next 4, sc in next 12. Join with slst. (80 sts)

Rnd 27: ch 1. Sc in same st & around. Join (80 sts)

Rnd 28: slst around. Join. f/o, weave in ends (80 slst)

Eyes (you can make one or 2. For smaller eyes or to make 2, drop hook size to h/5.0mm or g/4.5mm)

Rnd 1: With black, create a magic ring. 9 sc in ring. Join w/ slst

Rnd 2: ch 1. 2 hdc in each st around join with slst(18)

Rnd 3: with white. Ch 2, dc in same stitch, 2 dc in next. *1 dc, 2 dc * repeat around. Join w/ slst. (27)

Rnd 4: Ch 1. Sc in same st. sc in next, 2 sc in next. *sc, sc, 2sc* repeat around. Join, f/o (36)

Eye Lid

With Yellow, Make a magic circle. 6 sc.  Do NOT Join, ch 2, TURN

Dc in same st as join, 2dc in next, *dc in next, 2 dc in next*, repeat 2x (9 sts) TURN

Ch 2 Dc in same st, dc in next, dc in next, *2 dc, dc, dc*, repeat 2x. turn

Slst across flat part of lid. f/o & weave in ends(12 sts)

Putting the eye together

Rnd 1: With eyelid placed over the eye, attach gray through both the eyelid and the eye. Sc around. Join w/ slst.

Rnd 2: In BLO, sc around, join w/ slst. f/o

Attach eye to bag slightly off the black band. Add mouth with black yarn.

To add lining to bag: 

I have no actual tutorial for sewing in the liner. I will tell you what I did though. I took a piece of scrap fabric lying around. I believe it was purchased from Walmart (the red heart packs). I turned the bag inside out and attached the fabric with pins to the bottom. I lined up the top of the fabric to just above the black band and pinned in place. Using black #10 crochet thread and an embroidery needle, I tacked the bottom into place (you can sew all around the bottom if you wanted, I chose to just tack it). After attaching the bottom, I sewed up the sides using a whip stitch (I did not attach the sides to the bag) and then attached the top to the bag using a yellow #10 crochet thread.

I hope you have enjoyed this pattern!!

***** Please do not distribute pattern without permission.*****

 **I do not hold any copyright claim to the minion-type character. Due to copyright laws, you should not SELL the finished item. 

**If you have any questions about this pattern, please feel free to contact me on my facebook page located at http://www.facebook.com/atwipsend

minionbag2

Related Posts Plugin for WordPress, Blogger...